| KENWOOD KR-9400 RECEIVER Pictures and Features |
| Click on images for super-size view |
| Circa 1975, this is one gem of a receiver and was Kenwood's top of the line. Except for some discoloration of the raised plastic portion of the escutcheon, this entire unit is in wonderful cosmetic condition, as well as being functionally perfect. Unfortunately, the lighting conditions in my shop don't allow the beautiful shine of the front panel to come through. The fact is, you have to look very close to find any scratches except for a 3 inch segment on the top corner which has some noticeable small dings. The walnut sides are in beautiful shape, with only a tiny chip missing from the lower left corner. Again, you have to be looking for it to notice it. Let's list the controls, specs and features. - - - - - SPECS - - - - - 120 watts per channel minimum RMS at 8 ohms from 20 Hz to 20,000 Hz with no more than 0.1% total harmonic distortion 125 watts per channel into 8 ohms at 1000 Hz, 150 watts per channel into 4 ohms at 1000 Hz. Dynamic Power Output: 310 watts into 8 ohms, or 480 watts into 4 ohms. Intermodulation distortion: 0.02% Speaker impedance: Accepts from 4 ohms to 16 ohms AUX input and both tape monitor returns can be used for iPod, CD, MP3 player, VCR audio, DVD or Blu-Ray audio, audio from video games, or any other line level audio Both PHONO inputs are designed for use with a magnetic cartridge, and will accept signal levels from 2.5 mV to 150 mV Dimensions: 22" wide, 6.5" high, 15.5" front to back Weight: 45.4 pounds Rear panel has one switched AC outlet and one unswitched outlet. Switched outlet is live only when receiver is turned on. Bass control - plus or minus 10 dB at 100 Hz Midrange control: plus or minus 10 dB at 800 Hz Treble control: plus or minus 10 dB at 10,000 Hz - - - - - FEATURES AND CONTROLS - - - - - Volume, bass, midrange, treble, balance, selector, mic level Tape dubbing from Deck 1 to 2, or from Deck 2 to 1 Dolby FM - adds a beautiful shimmering brilliance to FM broadcasts FM zero center tuning meter FM Multipath meter, selectable to indicate Deviation also Switchable FM muting - tone defeat switch - switchable low and high filters Robust, labor-intensive 1970's quality and construction with huge transformers and filter capacitors, old-school IF transformers, TO-3 style power transistors, etc. Manual tuning allows YOU to decide where it sounds best |
| Back Panel (click for large view) |
| Under the Hood |
| This receiver comes with a full one year warranty, the exact same warranty it carried when brand new! Warranty covers defects or failures only - not fast or careless buying decisions! Ships to U.S ONLY due to its weight and international shipping costs and hassles - sorry Canada :-( Price: $ 250, INCLUDING SHIPPING |